Introducing the feature rich J3 electric actuator with LED status light and plug & play accessories.

The J3 range of electric actuators takes its highly successful predecessor, the J2 electric actuator range, to the next level. With an all new, rugged weatherproof and anti-corrosive Polyamide housing, the J3 electrcal actuator offers more user-friendly features than the J2, and introduces a highly visible LED status light. This visual indicator shows whether the electric valve actuator is operating correctly, or has tripped out either by its electronic torque limiter, or has been left in 'manual' mode. Site operators are no longer left with the 'valve or actuator?' question when an electric actuator doesn't respond to a signal.

New to the J3 electric actuator are plug and play accessories - the function can be changed to either failsafe or modulating by fitting the new plug and play conversion kits. The modulating kit has the new digital positioner that offers auto-calibrating and self resetting functionality.

                                                                       J3 Electric Actuator -  Standard features:

All new IP65 weatherproof housing LED status light Plug & play failsafe and/or modulating conversion kits 4 models covering torques from 25 to 90Nm (2 new models: 35 & 85) Multi-voltage capable electric actuator J3-L Series = 12-24V AC or DC J3-H Series = 110-240V AC or DC CE marked Electronic torque limiter with auto gearbox relaxing Thermostatic anti-condensation heater Manual override All external electrical connection via DIN plugs External wiring diagram Local visual position indicator Volt free end of travel position confirmation Multi-flange mounting to ISO:5211 Female star drive (double square) Serial numbered and traceable = New in the J3 J3C version introduced 2011 - dome indicator & IP67 Please note that this range superseded the J2 series in 2008.

Model	J3-20	J3-35	J3-55	J3-85	J3-140	J3-300
On-off 110-240V        J3-H Series
J3C-H Series
On-Off 12 - 24V          J3-L Series
J3C-L Series
Failsafe Plug & Play Kit
Modulating Plug & Play kit
Production due to start	Released July 2008				Q1 2012	Q1 2012

Full J3 electric actuator information including actuator installation instructions and actuator wiring diagrams are available from the Download Centre

Numerous industries really put

electric actuators

through their paces and they need units that are going to be extremely reliable, so, introducing the feature rich J+J multi-voltage actuator with LED status light and plug & play accessories.

The J3 electric actuator is quick and easy to install, with IS0:5211 multi-flange mounting and a double square drive, allowing fast mounting to ISO:5211 valves. There is no need to remove the cover to connect J3 electric actuators electrically, saving installation time. Using the external DIN plugs and external wiring diagrams supplied with the actuator, installations can be pre-wired. Protection against valve jams is provided by an electronic torque limiter, which auto-relaxes the gearbox when activated, allowing the manual override to be selected to assist in clearing the jam.

The effect of condensation is eliminated by an internal thermostatic anti-condensation heater that does not require a separate independent power supply. Standard function for the J3-H20 electric actuator is power open, power close, stays put on power failure.

< Go Back

Home of the J3 Electric Actuator

---